Water Tank Level 2 (NO)

AVTECH’s Water Tank Level 2 Sensor (NO)  monitors the rise and fall of water in a container (i.e. typically a large tank).

The float and the control weight are composed of chemically-resistant polypropylene; the 16′ cable is coated with rugged PVC.

Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels… both high and low.

Dimensions of the float switch are 5.1″ H x 3.0″ W.

The control weight is 4″ H x 2.25″ W. The 16′ attached cable with PVC coating has a protection rating of IP67 and NEMA 6.

The switch state differential range is a minimum of 10″ and a maximum of 50″.

Please see the Installation Note for more information.

SKU: RMA-WTL2-SEN Category:

Description

AVTECH’sWater Tank Level 2 Sensor (NO) monitors the rise and fall of water in a container (i.e. typically a large tank).

The float and the control weight are composed of chemically-resistant polypropylene; the 16′ cable is coated with rugged PVC.

Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels… both high and low.

Dimensions of the float switch are 5.1″ H x 3.0″ W.

The control weight is 4″ H x 2.25″ W. The 16′ attached cable with PVC coating has a protection rating of IP67 and NEMA 6.

The switch state differential range is a minimum of 10″ and a maximum of 50″.

Please see the Installation Note for more information.

There is also a Normally Closed (NC) version of this sensor called the Water Tank Level 1 Sensor (NC), product # RMA-WTL1-SEN.

Reviews

There are no reviews yet.

Be the first to review “Water Tank Level 2 (NO)”

Your email address will not be published. Required fields are marked *

6 + 15 =