Fuel Tank Level 1 (NC)

AVTECH’s Fuel Tank Level 1 (NC) monitors the rise and fall of fuel or other harsh liquids in a container (i.e. typically a large tank).

The float switch and the control weight are composed of chemically-resistant polypropylene; the 16′ cable is coated with rugged PVC. Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels… both high and low.

Dimensions of the float switch are 6.1″ H x 6.7″ W.

The control weight is 4″ H x 2.25″ W.

The 16′ attached cable with PVC coating has a protection rating of IP67 and NEMA 6.

The switch state differential range is a minimum of 10″ and a maximum of 50″.

Please see the Installation Note for more information.

SKU: RMA-FTL1-SEN Category:

Description

AVTECH’s Fuel Tank Level 1 Sensor (NC) monitors the rise and fall of fuel or other harsh liquids in a container (i.e. typically a large tank).

The float switch and control weight are composed of chemically-resistant polypropylene; the 16′ cable is coated with rugged PVC.

Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels… both high and low.

Dimensions of the float switch are 6.1″ H x 6.7″ W.

The control weight is 4″ H x 2.25″ W. The 16′ attached cable with PVC coating has a protection rating of IP67 and NEMA 6.

The switch state differential range is a minimum of 10″ and a maximum of 50″.

Please see the Installation Note for more information.

There is also a Normally Open (NO) version of this sensor called the Fuel Tank Level 2 Sensor (NO), product # RMA-FTL2-SEN.

Reviews

There are no reviews yet.

Be the first to review “Fuel Tank Level 1 (NC)”

Your email address will not be published. Required fields are marked *

11 + twenty =